TM 9-2320-361-20 13-13. REAR WINCH CABLE REPLACEMENT (M756A2) This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS M756A2 REFERENCES (TM) TM 9-2320-361-10 TM 9-2320-361-20P EQUIPMENT CONDITION • Parking brake set (TM 9-2320-361-10). • Rear winch cable unwound (TM 9-2320-361-10). GENERAL SAFETY INSTRUCTIONS Wear leather gloves when handling rear winch cable. WARNING Wear leather gloves when handling cable. Do not let cable run through hands. Broken or rusty wires can cause injury to personnel. 1. Loosen setscrew (2) and remove rear winch cable (3) from drum (l). 2. Remove nut (6) and screw (4) from clevis (5) and remove chain (7). 1. Install chain (7) on clevis (5) with screw (4) and nut (6). 2. Install rear winch cable (3) in drum (1) and tighten setscrew (2). FOLLOW-ON TASK: Wind rear winch cable on rear winch drum (TM 9-2320-361-10). 13-23