TM 9-2320-361-20 13-10. REAR WINCH CABLE REPLACEMENT (M764) This task covers: a. Removal c. Installation b. Inspection INITIAL SETUP: APPLICABLE MODELS EQUIPMENT CONDITION M764 Parking brake set (TM 9-2320-361-10). REFERENCES (TM] Rear winch cable unwound (TM 9-2320-361-10). TM 9-2320-361-10 GENERAL SAFETY INSTRUCTIONS TM 9-2320-361-20P Wear leather gloves when handling rear winch cable. WARNING Wear leather gloves when handling cable. Do not let cable run through hands. Broken or rusty wires can result in injury to personnel. Remove screw (2), clamp (3), and winch cable (5) from drum (1) and pull winch cable (5) out through level wind (4). Inspect winch cable (5) for damage; replace if damaged. Install cable (5) through level wind (4) onto drum (1) with clamp (3) and screw (2). FOLLOW-ON TASK: Wind winch cable (TM 9-2320-361-10). 13-17