TM 9-2320-361-20 13-9. REAR WINCH DRUM CLUTCH LEVER AND GUIDE PLATE REPLACEMENT (M756A2) This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) M756A2 TM 9-2320-361-10 MATERIALS/PARTS Two lockwashers Two grooved pins TM 9-2320-361-20P EQUIPMENT CONDITION Parking brake set (TM 9-2320-361-10). 1. Remove two screws (3), lockwashers (4), washers (5), data plate (6), and guide plate (7) from cab protector (2). Discard lockwashers (4). 2. Remove pin (8) and clutch lever (1) from winch shaft (9). Discard pin (8). 3. Remove pin (10), spring guide (11), center post (12), and two springs (13) from clutch lever (1). Discard pin (10). 1. 2. 3. Install spring guide (11), spring (13), center post (12), spring (13), and new pin (10) in clutch lever (1). Install clutch lever (1) on winch shaft (9) with new pin (8). Install guide plate (7) and data plate (6) on cab protector (2) with two washers (5), new lockwashers (4), and screws (3). 13-16