TM 9-2320-361-20 13-3. FRONT WINCH CABLE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS EQUIPMENT CONDITION All Parking brake set (TM 9-2320-361-10). REFERENCES (TM) LO 9-2320-209-12-1 TM 9-2320-361-10 Front winch cable unwound (TM 9-2320-361-10). GENERAL SAFETY INSTRUCTIONS Wear leather gloves when handling winch cable. TM 9-2320-361-20P WARNING Wear leather gloves when handling cable. Do not let cable run through hands. Broken or rusty wires can cause injury to personnel. 1. Loosen setscrew (2) and remove front winch cable (3) from drum (l). 2. Remove nut (4) and screw (6) from clevis (7) and remove chain (5). 1. 2. Install chain (5) on clevis (7) with screw (6) and nut (4). Install front winch cable (3) in drum (1) and tighten setscrew (2). FOLLOW-ON TASKS: Wind front winch cable on front winch drum (TM 9-2320-361-10). Lubricate winch cable (LO 9-2320-209-12-1). 13-3