12-94. TM 9-2320-361-20 This task covers: a. Disassembly b. Assembly INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) M764 TM 9-2320-361-10 MATERIALS/PARTS TM 9-2320-361-20P Twenty-one cotter pins EQUIPMENT CONDITION ŽParking brake set (TM 9-2320-361-10). •Collapsible cable reel removed (TM 9-2320-361-10). 1. 2. 3. 4, 5. 6. 7. 8. Remove plug (6) with handle (4) and two shims (20) from spindle (16) and sliding spider (19). Remove cotter pin (8), nut (7), screw (1 washer (2), spacer (3), plug (6), and spring (5) from handle (4). Discard cotter pin (8). Remove six cotter pins (21) and pins (23) from sliding spider (19) and six connecting links (22). Discard cotter pins (21). Remove cotter pin (13) and pin (18) from sliding spider (19) and remove spider (19) from spindle (16). Discard cotter pin (13). Remove six cotter pins (24), pins (26), and connecting links (22) from six rim segments (25). Discard cotter pins (24). Remove six cotter pins (12), pins (9), and rim segments (25) from spider (10). Discard cotter pins (12). Remove cotter pin (14) and pin (11) from spider (10). Discard cotter pin (14). Remove spider (10), rivet (17), and spring (15) from spindle (16). 1. 2. 3. 4. 5. 6. 7. 8. Install spring (15) and rivet (17) in spindle (16). Install spider (10) on spindle (16) with pin (11) and new cotter pin (14). Install six rim segments (25) on spider (10) with six pins (9) and new cotter pins (12). Install six connecting links (22) on rim segments (25) with six pins (26) and new cotter pins (24). Install sliding spider (19) on spindle (16) with pin (18) and new cotter pin (13). Install six connecting links (22) on sliding spider (19) with six pins (23) and new cotter pins (21). Install spring (5), plug (6), spacer (3), washer (2), screw (1), nut (7), and new cotter pin (8) in handle (4). Install two shims (20) and handle (4) with plug (6) on spindle (16). 12-156