12-91. TM 9-2320-361-20 This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) M764 TM 9-2320-361-10 MATERIALS/PARTS TM 9-2320-361-20P LO 9-2320-209-12-1 Three locknuts Five tiedowns traps (Appendix C, Item 20) EQUIPMENT CONDITION Sealing compound (Appendix C, Item 25) • Parking brake set (TM 9-2320-361-10). Cap and plug set (Appendix C, Item 8) • Hydraulic tank drained (LO 9-2320-209-12-1). CAUTION When disconnecting hydraulic lines and hoses, plug all openings to prevent dirt from entering and causing internal parts damage. Remove plugs prior to installation. NOTE •Tag all hoses for proper installation. ŽHave drainage container ready to catch oil. 1. Remove two tiedown straps (2) from crossmember (3). Discard tiedown straps (2). 2. Remove screw (1), locknut (4), and two clamps (5) from hoses (6) and crossmember (3). Discard locknut (4). 3. 4. 5. 6. Remove two screws (7), locknuts (10), and deflector (8) from crossmember (9). Discard locknuts (10). Disconnect hose (15) from adapter (11). Remove three tiedown straps (14) and hose (15) from crossmember (9). Discard tiedown straps (14). Remove adapter (11) from elbow (12). 12-148