TM 9-2320-361-20 12-58. REAR SPLASH GUARD REPLACEMENT (Contd) a. Lower Splash Guard Removal Remove four locknuts (9), screws (5), retainer strip (8), and lower splash guard (7) from upper splash guard (10). Discard locknuts (9). b. Upper Splash Guard Removal 1. Remove two locknuts (11) and screws (6) from two splash guard braces (12). Discard locknuts (11). 2. Remove two locknuts (1), screws (4), and splash guard braces (12) from frame (2). Discard locknuts (1). 3. Remove two locknuts (13), screws (3), and upper splash guard (10) from frame (2). Discard locknuts (13). c. Upper Splash Guard Installation 1. Install upper splash guard (10) on frame (2) with two screws (3) and new locknuts (13). 2. Install two splash guard braces (12) on frame (2) with two screws (4) and new locknuts (1). 3. Install splash guard braces (12) on upper splash guard (10) with two screws (6) and new locknuts (11). d. Lower Splash Guard Installation 1. Aline holes in lower splash guard (7) to holes in retainer strip (8). 2. Install retainer strip (8) and lower splash guard (7) on upper splash ward (10) with four screws (5) and new locknuts (9). 12-95