TM 9-2320-361-20 12-24. FUEL HOSE AND NOZZLE REPLACEMENT (M49A2C) This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS EQUIPMENT CONDITION M49A2C Parking brake set (TM 9-2320-361-10). MATERIALS/PARTS Fuel tanks drained (TM 9-2320-361-10). Gasket GENERAL SAFETY INSTRUCTIONS Antiseize tape (Appendix C, Item 27) Keep fire extinguisher nearby when working on fuel REFERENCES (TM) tank trucks. TM 9-2320-361-10 TM 9-2320-361-20P WARNING Do not perform this procedure while smoking or within 50 feet of sparks or open flame. Fuel is flammable and can explode easily, causing injury or death to personnel and damage to equipment. CAUTION All valves must be in OFF position. 1. Remove nozzle (11) from bushing (12). 2. Remove bushing (12) from fitting (13). 3. Remove fitting (13) from hose (1). 4. Remove two nuts (10), screws (6), coupling (7), and gasket (8) from meter outlet tube (9) and tube (5). Discard gasket (8). 5. Remove tube (5) from fitting (4). 6. Remove fitting (4) from swivel (3). 7. Remove swivel (3) from bushing (2). 8. Remove bushing (2) from hose (1). NOTE Male pipe threads must be wrapped with antiseize tape before installation. 1. 2. 3. 4. 5. 6. 7. 8. Install bushing (2) on hose (1). Install swivel (3) on bushing (2). Install fitting (4) on swivel (3). Install tube (5) on fitting (4). Install tube (5) and new gasket (8) on meter outlet tube (9) with coupling (7), two screws (6), and nuts (10). Install fitting (13) on hose (1). Install bushing (12) on fitting (13). Install nozzle (11) on bushing (12). 12-42