TM 9-2320-361-20 12-18. DUMP BODY SPARE TIRE CARRIER REPLACEMENT (Contd) 5. Remove eight locknuts (26), screws (27), support member (9), and cab support (10) from frame (25). Discard locknuts (26). 6. Remove locknut (18) and screw (17) from cab support (10), support member (9), and support (20). Discard locknut (18). 7. Remove five locknuts (19), screws (22), support (20), and bracket (21) from support member (9) and cab support (10). Discard locknuts (19). 8. Remove four locknuts (23), screws (16), and support (15) from support member (9) and cab support (10). Discard locknuts (23). 9. Remove four locknuts (24), screws (12), and retaining brace (28) from support member (9) and cab support (10). Discard locknuts (24). 10. Remove three locknuts (29), screws (13), and bracket (14) from cab support (10). Discard locknuts (29). 1. 2. 3. 4. 5. 6. Install bracket (14) on cab support (10) with three screws (13) and new locknuts (29). Install retaining brace (28) on cab support (10) and support member (9) with four screws (12) and new locknuts (24). Install support (20) on support member (9) and cab support (10) with screw (17) and new locknut (18). Install bracket (21) and support (20) on support member (9) and cab support (10) with five screws (22) and new locknuts (19). Install support (15) on support member (9) and cab support (10) with four screws (16) and new locknuts (23). Install support member (9) and cab support (10) on frame (25) with eight screws (27) and new locknuts (26). 12-27