TM 9-2320-361-20 12-17. DUMP BODY REAR SPLASH GUARD REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) M342A2 TM 9-2320-361-10 MATERIALS/PARTS TM 9-2320-361-20P Twelve locknuts EQUIPMENT CONDITION Parking brake set (TM 9-2320-361-10). 1. Remove five locknuts (4), screws (8), splash guard (7), and retaining strip (6) from guard (5). Remove retaining strip (6) from splash guard (7). Discard locknuts (4). 2. Remove five locknuts (3), screws (9), and guard (5) from mounting bracket (2). Discard locknuts (3). 3. Remove two locknuts (1), screws (10), and mounting bracket (2) from frame (11). Discard locknuts (1). 1. Install mounting bracket (2) on frame (11) with two screws (10) and new locknuts (1). 2. Install guard (5) on mounting bracket (2) with five screws (9) and new locknuts (3). 3. Install retaining strip (6) and splash guard (7) on guard (5) with five screws (8) and new lock- nuts (4). 12-24