TM 9-2320-361-20 12-5. CARGO BODY UPPER AND LOWER REAR SPLASH GUARD REPLACEMENT (M35A2C) This task covers: a. Lower Splash Guard Removal c. Upper Splash Guard Installation b. Upper Splash Guard Removal d. Lower Splash Guard Installation INITIAL SETUP: APPLICABLE MODELS M35A2C REFERENCES (TM) TM 9-2320-361-10 MATERIALS/PARTS TM 9-2320-361-20P Thirteen locknuts EQUIPMENT CONDITION Parking brake set (TM 9-2320-361-10). a. Lower Splash Guard Removal Remove five locknuts (8), screws (11), retaining strip (9), and lower splash guard (10) from upper splash guard (7). Discard locknuts (8). b. Upper Splash Guard Removal 1. Remove two locknuts (6) and screws (12) from upper splash guard braces (16) and upper splash guard (7). Discard locknuts (6). 2. Remove two locknuts (3), screws (4), and braces (16) from frame (5). Discard locknuts (3). 3. Remove two locknuts (18) and screws (2) from top of upper splash guard (7) and frame (1). Remove upper splash guard (7). Discard locknuts (18). 4. Remove two locknuts (13), screws (17), bumper (15), and plate (14) from upper splash guard (7). Discard locknuts (13). c. Upper Splash Guard Installation 1. Install plate (14) and bumper (15) on upper splash guard (7) with two screws (17) and new locknuts (13). 2. Install upper splash guard (7) on frame (1) with two screws (2) and new locknuts (18). 3. Install two braces (16) on frame (5) with two screws (4) and new locknuts (3). 4. Install upper splash guard braces (16) on upper splash guard (7) with two screws (12) and new locknuts (6). d. Lower Splash Guard Installation Place lower splash guard (10) in retaining strip (9) and install on upper splash guard (7) with five screws (11) and new locknuts (8). 12-6