TM 9-2320-361-20 11-42. PERSONNEL HOT WATER HEATER REPLACEMENT (Contd) c. Brackets Removal 1. Remove five locknuts (1), ten washers (2), five screws (6), and bracket (5) from fender (13) and bracket (4). Discard locknuts (1). 2. Remove two locknuts (1), four washers (2), bracket (4), and two screws (3) from frame (14). Discard locknuts (1). d. Brackets Installation 1. Install bracket (4) on frame (14) with two screws (3), four washers (2), and two new locknuts (1). 2. Install bracket (5) on fender (13) and bracket (4) with five screws (6), ten washers (2), and five new locknuts (1). e. Heater Installation 1. Install heater (7) on bracket (5) with four screws (12) and new locknuts (1). 2. Install wire (11) and clamp (9) on heater (7) with screw (10). 3. Connect electrical plugs (8). 11-82