TM 9-2320-361-20 11-39. PERSONNEL HEATER DIVERTER REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) All TM 9-2320-361-10 MATERIALS/PARTS TM 9-2320-361-20P Four lockwashers EQUIPMENT CONDITION Parking brake set (TM 9-2320-361-10). a. Removal 1. Loosen clamp (11) and disconnect supply hose (13) from diverter (9). 2. Loosen two clamps (4) and disconnect two defroster hoses (3) from diverter (9). 3. Loosen screw (7) and holddown clamp (8) and disconnect cable (10) from shaft handle (6). 4. Remove four nuts (1), lockwashers (2), screws (5), and diverter (9) from firewall (12). Discard lockwashers (2). b. Installation 1. Install diverter (9) on firewall (12) with four screws (5), new lockwashers (2), and nuts (1). 2. Install cable (10) through holddown clamp (8) and on shaft handle (6). Tighten holddown clamp (8) with screw (7). 3. Install two defroster hoses (3) on diverter (9) with two clamps (4). 4. Install supply hose (13) on diverter (9) with clamp (11). FOLLOW-ON TASK: Adjust control cable (para. 11-41). 11-76