TM 9-2320-361-20 11-37. DATA PLATE REPLACEMENT This task covers a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) All TM 9-2320-361-10 MATERIALS/PARTS TM 9-2320-361-20P Four drivescrews EQUIPMENT CONDITION Parking brake set (TM 9-2320-361-10). NOTE Data plates are installed with rivets, screws, drivescrews, or adhesive. This procedure covers a data plate installed with drive- screws. All data plate replacement procedures are basically the same. This procedure covers a front winch data plate replacement. Remove four drivescrews (3) and data plate (2) from support (1). Discard drivescrews (3). Install data plate (2) on support (1) with four new drivescrews (3). 11-74