TM 9-2320-361-20 11-24. WATER CAN BRACKET AND RUNNING BOARD REPLACEMENT This task covers: a. Water Can Bracket RemovaI c. Running Board Installation b. Running Board Removal d. Water Can Bracket Installation INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) All TM 9-2320-361-10 MATERIALS/PARTS Ten locknuts TM 9-2320-361-20P EQUIPMENT CONDITION Parking brake set (TM 9-2320-361-10). a. Water Can Bracket Removal 1. Remove strap (9) from water can bracket (2). 2. Remove six screws (1), locknuts (3), and water bracket (2) from toolbox (4) and running board (8). Discard locknuts (3). b. Running Board Removal I Remove four screws (6), locknuts (7), and running board (8) from two supports (5). Discard locknuts (7). c. Running Board Installation Install running board (8) on two supports (5) with four screws (6) and new locknuts (7). d. Water Can Bracket Installation 1. Install water can bracket (2) on running board (8) and toolbox (4) with six screws (1) and new locknuts (3). 2. Install strap (9) on water can bracket (2). 11-40