TM 9-2320-361-20 11-17. CAB COWL VENT REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) All TM 9-2320-361-10 MATERIALS/PARTS TM 9-2320-361-20P Cotter pin EQUIPMENT CONDITION Adhesive (Appendix C, Item 2) Parking brake set (TM 9-2320-361-10). a. Removal 1. Remove nine screws (4) and cowl vent screen (5) from kick panel (1). 2. Remove cotter pin (8), hinge pin (3), and cab cowl vent door (6) from bracket (2). Discard cotter pin (8). 3. Inspect cab cowl vent door seal (7). If damaged, clean cab cowling seal mounting surface (9) free of cab cowl vent seal (7) debris. NOTE Perform steps 1 and 2 only if seal was removed. 1. Apply adhesive to mounting side of seal (7) and cab cowling seal mounting surface (9). 2. Install cab cowl vent seal (7) on cab cowling seal mounting surface (9). 3. Install cab cowl vent door (6) and hinge pin (3) on bracket (2) with new cotter pin (8). 4. Install cab cowl vent screen (5) on kick panel (1) with nine screws (4). 11-26