TM 9-2320-361-20 11-16. CAB HANDLE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS All MATERIALS/PARTS Four locknuts REFERENCES (TM) TM 9-2320-361-10 TM 9-2320-361-20P EQUIPMENT CONDITION Parking brake set (TM 9-2320-361-10). 1. Remove soft top rope (2) from cab handle (4). 2. Remove four screws (5), locknuts (6), plate (1), and cab handle (4) from cab (3). Discard locknuts (6). b. Installation 1. Install cab handle (4) and plate (1) on cab (3) with four screws (5) and new locknuts (6). 2. Tie soft top rope (2) on cab handle (4). 11-25