TM 9-2320-361-20 11-14. HOOD MAINTENANCE This task covers: a. Removal c. Installation b. Repair INITIAL SETUP APPLICABLE MODELS All MATERIALS/PARTS Eight locknuts Eight split rivets Adhesive (Appendix C, Item 1) PERSONNEL REQUIRED Two REFERENCES (TM) TB 43-0209 TC 9-510 TM 9-237 TM 9-2320-361-10 TM 9-2320-361-20P EQUIPMENT CONDITION Parking brake set (TM 9-2320-361-10). Hood holddown fasteners and brackets removed (para. 11-13). Windshield holddovvn fasteners and brackets removed (para. 11-20). a. Removal 1. Raise hood (5) and remove eight split rivets (7) and two rubber bumpers (6) from hood (5). Discard split rivets (7). NOTE Assistant will help with step 2. 2. Remove eight locknuts (4), two reinforcements (3), eight screws (1), and hood (5) from two hinges (2). Discard locknuts (4). 3. Remove adhesive remains from hood. 1. Refer to TM 9-237 for welding repair. 2. Refer to TC 9-510 for metal body repair. 3. Refer to TB 43-0209 for rustproofing instructions. c. Installation NOTE Assistant will help with step 1. 1. Install hood (5) on two hinges (2) with two reinforcements (3), eight screws (1), and new locknuts (4). 2. Apply adhesive to rubber bumpers (6). 3. Install two rubber bumpers (6) on hood (5) with eight new split rivets (7). 11-22