TM 9-2320-361-20 11-12. HEADLIGHT BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS EQUIPMENT CONDITION All Brush guard removed (para. 10-8). REFERENCES (TM) Sealed beam and headlight housing removed (para. 4-39). TM 9-2320-361-10 Blackout drive lamp and housing removed (para. 4-42). a. Removal 1. Remove two screws (5), washers (4), and brace (7) from front fender (1) and headlight bracket (9). 2. Remove three nuts (15), washers (14) and (11), and screws (10) from headlight bracket (9). 3. Remove two nuts (16), washers (17), and screws (6) from front hinge (2) and side panel (3). 4. Remove two nuts (13), washers (12), screws (8), and headlight bracket (9) from front fender (1). 1. Install headlight bracket (9) on front fender (1) with two nuts (13), washers (12), and screws (8). 2. Install front hinge (2) on side panel (3) with two nuts (16), washers (17), and screws (6). 3. Install headlight bracket (9) on front fender (1) with three nuts (15), washers (14) and (11), and screws (10). 4. Install brace (7) on headlight bracket (9) and front fender (1) with two washers (4) and screws (5). 11-18