TM 9-2320-361-20 11-11. SIDE PANEL REPLACEMENT (Contd) I e. Side Panel Installation I 1. With hinges (8) and (12) alined, raise spring clip (7), and install side panel (4) on fender (9) by sliding side panel (4) to the rear until in place. 2. Lock side panel (4) to fender (9) by turning thumb cranks (2). 3. Install rain hood (17) on air intake (16) with clamp (15). I f. Thumb Cranks Installation 1. Install two thumb cranks (2) on side panel (4) with four screws (1) and new locknuts (3). NOTE Perform steps 2 and 3 if side panel was removed. 2. Lock side panel (4) to fender (9) by turning thumb cranks (2). 3. Install rainhood (17) on air intake (16) with clamp (15). 11-17