TM 9-2320-361-20 10-10. FRONT WINCH EXTENSION REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) All TM 9-2320-361-10 MATERIALS/PARTS TM 9-2320-361-20P Ten locknuts EQUIPMENT CONDITION Parking brake set (TM 9-2320-361-10). Front winch removed (para. 13-5). Brush guard removed (para. 10-8). 1. Remove four locknuts (5) and screws (3) from bottom of frame rail (2). Discard locknuts (5). 2. Remove six locknuts (4), screws (7), loop tiedown (1), and front winch extension (6) from frame rail (2). Discard locknuts (4). b. Installation 1. Install front winch extension (6), and loop tiedown (1) on frame rail (2) with six screws (7) and new locknuts (4). Do not tighten nuts (4). 2. Install four screws (3) and new locknuts (5) through bottom of frame rail (2) and front winch extension (6). 3. Tighten nuts (5). FOLLOW-ON TASKS: Install front winch (para. 13-5). Install brush guard (para. 10-8). 10-14