TM 9-2320-361-20 10-7. SPARE TIRE CARRIER MAINTENANCE (Contd) 1. Install shaft (8) and ratchet (9) in housing (6) with new cotter pin (5). 2. Install ends of cable (7) through holes in shaft (8) and feed ends of cable (7) through hole in bottom of housing (6). NOTE Ensure cable ends are of equal length through shaft. 3. Install two U-bolts (13) on pickup member (14) with four new lockwashers (11) and nuts (10). Do not tighten nuts (10). NOTE Ensure cable ends extend through both U-bolts before tightening nuts in step 4. 4. Install ends of cable (7) through holes in pickup member (14) and U-bolts (13). Tighten nuts (10). Install spare tire carrier (2) on frame (4) with four screws (1) and new locknuts (3). Tighten locknuts (3) 30-35 lb-ft (41-47 NŽm). FOLLOW-ON TASK: Install spare tire (TM 9-2320-361-10). 10-9