TM 9-2320-361-20 10-6. REAR BUMPERETTE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) All (except M275A2, TM 9-2320-361-10 M764, M342A2) TM 9-2320-361-20P MATERIALS/PARTS EQUIPMENT CONDITION Six locknuts Parking brake set (TM 9-2320-361-10). Rear composite light removed (para. 4-46). 1. Remove two locknuts (2) and screws (4) from crossmember (3) and rear bumperette (5). Discard locknuts (2). NOTE Wiring harness clamp is located on left side only. 2. Remove four locknuts (1), screws (7), composite light bracket (6), clamp (9), and rear bumperette (5) from frame (8). Discard locknuts (1). b. Installation 1. Install rear bumperette (5) on rear crossmember (3) with two screws (4) and new locknuts (2). NOTE Wiring harness clamp is located on left side only. 2. Install composite light bracket (6) and clamp (9) on bumperette (5) and frame (8) with four screws (7) and new locknuts (1). FOLLOW-ON TASK: Install rear composite light (para. 4-46). 10-7