TM 9-2320-361-20 8-12. SERVICE BRAKE BLEEDING (Contd) 17. If all wheel cylinders (14) need to be bled, start with wheel cylinder farthest from air-hydraulic cylinder (18) and progressively go in distance sequence to wheel cylinder (18) nearest to air- hydraulic cylinder (18). Tighten wheel cylinder bleeder screws (15) 10-15 lb-ft (14-20 NŽm). 18. When finished bleeding hydraulic system, turn valve (13) “OFF’ and disconnect female quick- disconnect coupling (12) on tank hose (11) from male quick-disconnect coupling (8) and adapter plug (9). CAUTION Dispose of brake fluid in approved disposal area. Do not reuse brake fluid. Reusing brake fluid may result in damage to equipment. 19. Remove adapter plug (9) with male quick-disconnect coupling (8) and install filler plug (5) and adapter (4) in master cylinder (6). Tighten filler plug (5) 15-20 lb-ft (20-27 NŽm). 20. Connect vent line (3) to adapter (4). 21. Remove bleeder tank (10) from cab. Follow equipment manufacturers instructions for placing bleeder tank (10) in storage. 22. Close access door (1) and install new screw-assembled lockwasher (7). 8-33