TM 9-2320-361-20 8-4. PARKING BRAKE CABLE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS EQUIPMENT CONDITION All Parking brake lever removed (para. 8-5). MATERIALS/PARTS Remove spare tire if mounted horizontal to rear of toolbox (M275A2 and M342A2) Lockwasher (TM 9-2320-361-10). REFERENCES (TM] Wheels chocked (TM 9-2320-361-10). TM 9-2320-361-10 TM 9-2320-361-20P a. Removal 1. 2. 3. 4. 5. 6. Remove spring (3) from lever (5) and bracket (4). NOTE Mark nut position on threaded end of parking brake cable for installation. Remove nut (2) from threaded end (1) of parking brake cable (6) and slide parking brake cable (6) from eye of lever (5). Remove screw (10), lockwasher (9), and clamp (8) from parking brake cable (6) and transfer case (7). Discard lockwasher (9). Remove two nuts (14), screws (11), upper clamp half (12), lower clamp half (15), and parking brake cable (6) from frame (13). Remove two nuts (19), screws (18), clamp (17), spacer (16), and parking brake cable (6) from bracket (20). Remove four nuts (24), screws (21), two clamps (22), and parking brake cable (6) from wear plate (23). 8-12