TM 9-2320-361-20 8-3. PARKING BRAKESHOE MAINTENANCE This task covers: a. Removal d. Assembly b. Disassembly e. Installation c. Cleaning and Inspection f. Clearance Adjustment INITIAL SETUP: APPLICABLE MODELS All MATERIALS/PARTS Four clips Lockwasher Pin Rags (Appendix C, Item 21) GAA grease (Appendix C, Item 13) Drycleaning solvent (Appendix C, Item 26) REFERENCES (TM) TM 9-2320-361-10 TM 9-2320-361-20P EQUIPMENT CONDITION Wheels chocked (TM 9-2320-361-10). Transfer-to-forward rear axle propeller shaft removed (all except M36A2) (para. 7-2). Intermediate propeller shaft removed (M36A2) (para. 7-3). GENERAL SAFETY INSTRUCTIONS Keep fire extinguisher nearby when using drycleaning solvent. a. Removal 1. 2. 3. 4. 5. 8-4 Remove spring (3) from lever (6) and bracket (4). NOTE Mark nut position on threaded end of parking brake cable for installation. Remove nut (2) from threaded end (1) of parking brake cable (11) and slide parking brake cable (11) from eye of lever (6). Remove spring (12) from outer brakeshoe (7) and screw (5). Remove jamnut (13) and screw (5) from bracket (14). Remove jamnut (16), screw (8), spacer, lever (6), inner brakeshoe (9), and outer brakeshoe (7) from parking brakedrum (10) and bracket (15).