TM 9-2320-361-20 7-8. FRONT AND REAR AXLE BREATHER MAINTENANCE This task covers: a. Removal c. Installation b. Cleaning INITIAL SETUP: APPLICABLE MODELS All MATERIALS/PARTS Drycleaning solvent (Appendix C, Item 26) Rags (Appendix C, Item 21) REFERENCES (TM) TM 9-2320-361-10 TM 9-2320-361-20P EQUIPMENT CONDITION Parking brake set (TM 9-2320-361-10). GENERAL SAFETY INSTRUCTIONS Keep fire extinguisher nearby when using drycleaning solvent. a. Removal NOTE This procedure is for all axles. Remove breather (1) from axle housing (2). b. Cleaning WARNING Drycleaning solvent is flammable and will not be used near open flame. Use only in well-ventilated places. Failure to do so may result in injury to personnel. Clean breather (1) in drycleaning solvent and dry with clean rag. c. Installation Install breather (1) in axle housing (2). 7-21