TM 9-2320-361-20 5-4. TRANSMISSION GEARSHIFT LEVER REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) All TM 9-2320-361-20P MATERIALS/PARTS EQUIPMENT CONDITION Lockwasher Transmission gearshift lever knob and boot removed (para. 5-3) 1. Position transmission shifter shaft (3) in neutral. 2. Remove nut (1), lockwasher (2), screw (4), and gearshift lever (3) from transmission shaft (5). Discard lockwasher (2). Install gearshift lever (3) on transmission shifter shaft (5) with screw (4), new nut (1). Tighten nut (1) 40-50 lb-ft. (54-68 NŽm). lockwasher (2), and FOLLOW-ON TASK: Install gearshift lever knob and boot (para. 5-3). 5-4