TM 9-2320-361-20 5-3. TRANSMISSION GEARSHIFT LEVER KNOB AND BOOT REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP APPLICABLE MODELS EQUIPMENT CONDITION All Parking brake set (TM 9-2320-361-10). REFERENCES [TM] TM 9-2320-361-10 TM 9-2320-361-20P a. Removal 1. Rotate gearshift knob (1) counterclockwise, and remove from gearshift lever (3). 2. Slide boot (2) up and off ball socket pedestal (4) and gearshift lever (3). 1. 2. CAUTION Use care during installation to prevent sharp edges from cutting boot. Slide boot (2), small end facing up, over gearshift lever (3) and slide down to fit over ball socket pedestal (4) on transmission housing. Rotate gearshift knob (1) clockwise to install on gearshift lever (3). 5-3