TM 9-2320-361-20 4-44. FLOODLAMP REPLACEMENT This task covers: a. Floodlamp Removal b. Floodlamp Installation INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) M756A2 TM 9-2320-361-10 MATERIALS/PARTS Two lockwashers Three O-rings TM 9-2320-361-20P EQUIPMENT CONDITION Parking brake set (TM 9-2320-361-10). Battery ground cable disconnected (para. 4-48). Floodlamp housing removed (para. 4-43). a. Floodlamp Removal 1. Loosen three screws (1) and remove lamp door (2) and three O-rings (3) from floodlamp housing (9). Discard O-rings (3). NOTE Tag all wires for installation. 2. Remove two screws (8), lockwashers (7), and wires (5) and (6) from lamp (4). Discard lockwashers (7). 3. Remove four springs (10) and lamp (4) from lamp door (2). b. Floodlamp Installation FOLLOW-ON TASKS: Connect battery ground cable (para. 4-48). Check operation of floodlamp (TM 9-2320-361-10). 4-68