TM 9-2320-361-20 4-43. FLOODLAMP HOUSING AND MOUNT MAINTENANCE This task covers: a. Floodlamp Housing and Mount Removal c. Floodlamp Housing and Mount Assembly b. Floodlamp Housing and Mount Disassembly d. Floodlamp Housing and Mount Installation INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) M756A2 TM 9-2320-361-10 MATERIALS/PARTS TM 9-2320-361-20P Four lockwashers EQUIPMENT CONDITION ● Parking brake set (TM 9-2320-361-10). ● Battery ground cable disconnected (para. 4-48). ● Floodlamp removed (para. 4-44). a. Floodlamp Housing and Mount Removal NOTE Tag all wires for installation. 1. Disconnect two wires (11) from connectors (1). 2. Remove handle (6) from cab protector (10) and remove floodlamp housing (2) and floodlamp housing mount (5). I b. Floodlamp Housing and Mount Disassembly 1. 2. 3. 4. 5. 6. 7. Remove two nuts (7) and (8), washer (9), floodlamp housing bracket (3), and washer (4) from floodlamp housing mount (5). Remove two nuts (13), lockwashers (14), and washers (15) from screws (30). Discard lock- washers (14). Remove two screws (30), washers (29), four spring washers (28), two washers (27), floodlamp housing bracket (3), two washers (26), spacers (20), and grommet (19) from floodlamp housing (2). Disconnect wires (12) and (22) from two connectors (1). Remove two screws (17), lockwashers (18), and switch (23) from floodlamp housing (2). Discard lockwashers (18). Remove two screws (25), retainer (24), and switch top (23) from bottom of switch (21). Remove two connectors (1) and grommets (16) from floodlamp housing (2). c. Floodlamp Housing and Mount Assembly 1. 2. 3. 4. 5. 6. 7. 8. 4-66 Install two grommets (16) and connectors (1) in floodlamp housing (2). Install switch top (23), retainer (24), and two screws (25) in switch bottom (21). Install switch (21), two new lockwashers (18), and screws (17) in floodlamp housing (2). Connect two wires (12) and (22) to connectors (1). Install two grommets (19) and spacers (20) on floodlamp housing (2). Position floodlamp housing (2) and two washers (26) on floodlamp housing bracket (3) and install with two washers (27), four spring washers (28), two washers (29), and screws (30). Install two washers (15), new lockwashers (14), and nuts (13) to screws (30). Install washer (4) with floodlamp housing bracket (3), washer (9), and two nuts (8) and (7) to floodlamp housing mount (5).