TM 9-2320-361-20 This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) All TM 9-2320-361-10 MATERIALS/PARTS TM 9-2320-361-20P Antiseize tape (Appendix C, Item 27) EQUIPMENT CONDITION Parking brake set (TM 9-2320-361-10). Battery ground cable disconnected (para. 4-48). NOTE Tag wires for installation. 1. Disconnect wires (1) and (4) from low air pressure switch (2). 2. Remove low air pressure switch (2) from tube and hose manifold (3). NOTE Clean all male pipe threads, and wrap with antiseize tape before installation. 1. Install low air pressure switch (2) in tube and hose manifold (3). 2. Connect wires (1) and (4) to low air pressure switch (2). FOLLOW-ON TASKS: Connect battery ground cable (para. 4-48) Start engine (TM 9-2320-361-10) and check low air pressure switch operation. 4-40