TM 9-2320-361-20 4-3. ALTERNATOR (60 AMPERE) AND MOUNTING BRACKET REPLACEMENT (Contd) WARNING Alternator must be supported during removal. Failure to support alternator may cause injury to personnel or damage to equipment. 10. Remove two cotter pins (22), two nuts (23), shims (31), four washers (24) and (26), two screws (27), and alternator (25). Discard two cotter pins (22). NOTE Perform step 11 only if alternator mounting bracket is damaged. 11. Remove three screws (28), lockwashers (29) and alternator mounting bracket (30) from engine (32). Discard lockwashers (29). 12. Remove alternator pulley (21) (para. 4-4). 4-5