TM 9-2320-361-20 3-42. RADIATOR AND BRACKETS REPLACEMENT (Contd) b. Installation NOTE Perform step 1 if radiator cap and draincock were removed. 1. Install radiator cap (1) and draincock (3) on radiator (2). 2. Install left bracket (10) and right bracket (7) on radiator (2) with four screws (6) and new locknuts (12). 3. Install support (8) on left bracket (10) and right bracket (7) with two screws (9) and new locknuts (11). 4. Install two shims (4) on radiator mounting studs (5). CAUTION Radiator core is easily damaged. Use care when working near or handling radiator. NOTE Assistant will help with step 5. 5. Carefully install radiator (2) on vehicle. 6. Install rod assembly (15) on bracket (14) with screw (13) and new locknut (16). 7. Install two washers (18), springs (21), washers (19), and new locknuts (20) on radiator mounting studs (5). Do not fully compress springs (21). 8. Install ground strap (24) on radiator (2) with screw (17), new lockwasher (25), washer (23), and new locknut (22). 3-98