TM 9-2320-361-20 3-19. TURBOCHARGER OIL DRAIN TUBE, HOSE, AND ADAPTER REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) All TM 9-2320-361-10 MATERIALS/PARTS TM 9-2320-361-20P Gasket EQUIPMENT CONDITION Two lockwashers Parking brake set (TM 9-2320-361-10). Antiseize tape (Appendix C, Item 27) Hood raised and secured (TM 9-2320-361-10). a. Removal 1. Remove two screws (7) and lockwashers (8) from breather tube (9), oil drain tube (2), and turbocharger (1). Discard lockwashers (8). 2. Loosen two clamps (6) and remove oil drain tube (2) and gasket (10) from turbocharger (1) and hose (4). Discard gasket (10). 3. Remove hose (4) and two clamps (6) from oil drain adapter (5). 4. Remove oil drain adapter (5) from engine (3). NOTE Male pipe threads must be wrapped with antiseize tape before installation. 1. Install oil drain adapter (5) on engine (3). 2. Install hose (4) and two clamps (6) on oil drain adapter (5). Do not tighten clamps (6). 3. Install oil drain tube (2) on hose (4). 4. Install new gasket (10), oil drain tube (2), and breather tube (9) on turbocharger (1) with two new lockwashers (8) and screws (7). 5. Tighten two clamps (6). FOLLOW-ON TASK: Remove oil inlet tube and refill turbocharger (para. 3-18). 3-30