TM 9-2320-361-20 Section V. TURBOCHARGER MAINTENANCE 3-17. TURBOCHARGER MAINTENANCE INDEX PARA. TITLE PAGE NO. NO. 3-18. Turbocharger Oil Inlet Tube and Adapter Replacement 3-28 3-19. Turbocharger Oil Drain Tube, Hose, and Adapter Replacement 3-30 3-18. TURBOCHARGER OIL INLET TUBE AND ADAPTER REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) All TM 9-2320-361-10 MATERIALS/PARTS TM 9-2320-361-20P Gasket EQUIPMENT CONDITION Two lockwashers Parking brake set (TM 9-2320-361-10). Cap and plug set (Appendix C, Item 8) Hood raised and secured (TM 9-2320-361-10). Antiseize tape (Appendix C, Item 27) Lubricating oil OE/HDO 30 (Appendix C, Item 19) CAUTION Cover or plug all hoses, connections, and openings immediately after disconnection or component removal to prevent contamina- tion. Remove all plugs prior to connection. 1. Remove oil inlet tube (3) from elbow (5) and oil inlet adapter (8). 2. Remove elbow (5) from engine (4). 3. Remove two screws (1), lockwashers (2), oil inlet adapter (8), and gasket (7) from turbocharger (6). Discard lockwashers (2) and gasket (7). 1. Install new gasket (7) and oil inlet adapter (8) on turbocharger (6) with two new lockwashers (2) and screws (1). 2. Add 2 oz. (59 ml) of new engine oil into oil inlet adapter (8). 3. Install elbow (5) on engine (4). 4. Install oil inlet tube (3) on elbow (5) and oil inlet adapter (8). 3-28