TM 9-2320-361-20 3-15. AIR CLEANER ASSEMBLY MAINTENANCE This task covers: a. Removal c. Installation b. Inspection INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) All TM 9-2320-361-10 MATERIALS/PARTS TM 9-2320-361-20P Four lockwashers EQUIPMENT CONDITION Antiseize tape (Appendix C, Item 27) Parking brake set (TM 9-2320-361-10). PERSONNEL REQUIRED Hood raised and secured (TM 9-2320-361-10). Air intake tube and cap removed (para. 3-13). Two Air cleaner element removed (para. 3-14). 1. Disconnect tube (2) from connector (3), and remove connector (3) from air cleaner head (4). NOTE Assistant will help with step 2. 2. Remove four nuts (1), screws (6), lockwashers (5), and air cleaner head (4) from firewall (7). Discard lockwashers (5). b. Inspection Inspect air cleaner head (4) for cracks or damage that would allow unfiltered air to enter. Replace air cleaner head (4) if cracked or damaged. NOTE Assistant will help with step 1. 1. Install air cleaner head (4) on firewall (7) with four screws (6), new lockwashers (5), and nuts (1). NOTE Male pipe threads must be wrapped with antiseize tape before installation 2. Install connector (3) on air cleaner head (4). 3. Connect tube (2) FOLLOW-ON TASKS: to connector (3). Install air cleaner element (para. 3-14). Install air intake tube and cap (para. 3-13). 3-24