TM 9-2320-361-20 3-11. PEDAL SHAFT SUPPORT REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) All TM 9-2320-361-20P MATERIALS/PARTS EQUIPMENT CONDITION Five locknuts Clutch control linkage removed (para. 3-10). 1. Remove five locknuts (4), screws (1), and pedal shaft support (3) from chassis (2). Discard locknuts (4). 2. Remove two grease fittings (5) from pedal shaft support (3). b. Installation 1. Install two grease fittings (5) in pedal shaft support (3). 2. Install pedal shaft support (3) on chassis (2) with five screws (1) and new locknuts (4). FOLLOW-ON TASK: Install clutch control linkage (para. 3-10). 3-19