TM 9-2320-361-20 3-10. CLUTCH CONTROL LINKAGE MAINTENANCE (Contd) c. Adjustment 1. Loosen nut (3), pull pin (4) to one side of clevis (5), and remove clevis (5) from remote control lever (1). 2. 3. 4. 5. If pedal free travel is less than 1.5 in. (3.8 cm), shorten length of rod (2) by tightening clevis (5) on rod (2). If pedal free travel is more than 2 in. (5.1 cm), lengthen rod (2) by loosening clevis (5) on rod (2). Install clevis (5) on remote control lever (1) with pin (4). Press pin (4) into clevis (5) until head of pin (4) seats against clevis (5). Recheck pedal free travel (steps 17-18, subtask b.) and tighten nut (3). FOLLOW-ON TASKS: Lubricate clutch control linkage (LO 9-2320-209-12-1). Install hydraulic master cylinder (para 8-10). Install transmission power takeoff shift linkage (vehicles with transmission PTO only) (para. 13-20). Install accelerator pedal, bracket, and rod (para. 3-33). 3-18