TM 9-2320-361-20 Section IV. REMARKS TM 9-2320-361-20 REFERENCE CODE REMARKS A Perform PMCS as shown in TM 9-2320-361-10. B Engine overhaul will be in accordance with DMWR 9-2815-500. C Welding will be in accordance with TM 9-237. D Repair of lines and fittings will be in accordance with TM 9-243. E Test and repair of radiator will be in accordance with TM 750-254. F Repair of alternator will be in accordance with TM 9-2920-225-34. G Repair of starter will be in accordance with TM 9-2920-243-34. H Repair of batteries will be in accordance with TM 9-6140-200-14. I Transmission repair and overhaul will be in accordance with TM 9-2520-246-34. J Transfer overhaul will be in accordance with TM 9-2320-246-34. K Overhaul of front and rear axle will be in accordance with DMWR 9-2520-508. L Tires/Tubes: Repair TM 9-2610-200-24 Inspection TM 9-2610-201-14 Storage TM 743-200-1 M Repair of frames will be in accordance with TB 2300-247-40. N Metal body repair will be in accordance with TC 9-510. O Overhaul of front and rear winches will be in accordance with DMWR 9-3830-501. P Refer to kit installation instructions for kit installation. Q Inspection of brake lines will be in accordance with TB 9-2300-405-14. R Service/inspection of winch/hoist wire rope/cables will be in accordance with TB 43-0142 and TB 9-0352. S Repair of heaters will be in accordance with TM 9-2540-205-24&P. T Repair of canvas will be in accordance with TM 10-267. U Inspection and repair will be in accordance with TM 9-2815-210-34. V Inspection and repair of turbocharger will be in accordance with TM 9-2990-201-40&P. W Inspection and repair of brake drums will be in accordance with TM 9-4910-482-10. B-26