TM 9-2320-361-20 14-55. FIXED SEATBELT KIT REPLACEMENT This task covers: a. Removal of Driver’s Seatbelts c. Removal of Companion Seatbelts b. Installation of Driver’s Seatbelts d. Installation of Companion Seatbelts INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) All TM 9-2320-361-10 TMATERIALS/PARTS TM 9-2320-361-20P Twelve locknuts EQUIPMENT CONDITION PERSONNEL REQUIRED Parking brake set (TM 9-2320-361-10). Companion seat removed (para. 11-26). Two a. Removal of Driver’s Seatbelts 1. Pull driver’s seat (1) to full forward position. 2. Remove locknut (5), screw (2), two washers (3), and seatbelt (4) from back cab panel channel (6). Discard locknut (5). 3. Remove locknut (8), washer (9), screw (25), seatbelt (7), and spacer (26) from back cab panel channel (6). Discard locknut (8). NOTE Assistant will help with step 4. 4. Remove four locknuts (24), screws (10), and eight washers (11) from back cab panel channel (6). Discard locknuts (24). b. Installation of Driver’s Seatbelts 1. Install seatbelt (4) on back cab panel channel (6) with two washers (3), screw (2), and new locknut (5). 2. Install spacer (26) and seatbelt (7) on back cab panel channel (6) with screw (25), washer (9), and new locknut (8). NOTE Assistant will help with step 3. 3. Install eight washers (11), four screws (10), and new locknuts (24) on back cab panel channel (6). c. Removal of Companion Seatbelts 1. Remove locknut (16), seatbelt (17), spacer (22), screw (12), and washer (13) from back cab panel channel (6). Discard locknut (16). 2. Remove locknut (21), seatbelt (18), screw (19), and washer (20) from back cab panel channel (6). Discard locknut (21). NOTE Assistant will help with step 3. 3. Remove four locknuts (23), screws (14), and eight washers (15) from back cab panel channel (6). 14-94