TM 9-2320-361-20 14-47. FIRE EXTINGUISHER MOUNTING KIT REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) All TM 9-2320-361-10 MATERIALS/PARTS TM 9-2320-361-20P Four locknuts EQUIPMENT CONDITION Parking brake set (TM 9-2320-361-10). 1. Open two clamps (6), and remove fire extinguisher (8) from mounting bracket (7). 2. Remove four locknuts (3), screws (1), washers (2), and mounting bracket (7) from cab (4). Discard locknuts (3). 1. Install mounting bracket (7) on cab (4) with four washers (2), screws (1), and new locknuts (3). 2. Install fire extinguisher (8) on mounting bracket (7) and close two clamps (6). 3. Tighten or loosen adjusting screws (5) to hold fire extinguisher (8) in place. 14-82