TM 9-2320-361-20 14-46. CHEMICAL AGENT ALARM MOUNTING KIT REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) All TM 3-6665-225-12 MATERIALS/PARTS TM 9-2320-361-10 TM 9-2320-361-20P Four tiedown straps (Appendix C, Item 20) Six locknuts EQUIPMENT CONDITION PERSONNEL REQUIRED Parking brake set (TM 9-2320-361-10). Hood raised and secured (TM 9-2320-361-10). Two Battery ground cable disconnected (para. 4-48). M43 detector and M42 alarm unit removed (TM 3-6665-225-12). 1. Remove nut (3) and harness receptacle (5) from bracket (2). 2. Remove three locknuts (10), support (9), three screws (4), and detector unit bracket (1) from left front fender (8). Discard locknuts (10). 3. Remove screw (6) and clamp (7) from front fender (8). 4. Disconnect wire (16) from connector (17). 5. Remove locknut (11), washer (12), screw (19), harness ground wire (18), ground strap (15), and washer (14) from right side of turn signal flasher box (13). Discard locknut (11). 14-78