TM 9-2320-361-20 14-45. DECONTAMINATION MOUNTING KIT REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS EQUIPMENT CONDITION All Parking brake set (TM 9-2320-361-10). REFERENCES (TM) TM 9-2320-361-10 TM 9-2320-361-20P TM 3-4230-204-12&P Decontamination apparatus removed (TM 3-4230-204-12&P). a. Removal 1. Slide boot (5) up gearshift lever (6). 2. Remove nut (4), screw (2), washer (1), and gearshift lever (6) from transmission stud shaft (3). 3. Remove thirteen screws (8) and intermediate tunnel (7) from cab floor (9). 4. Remove four nuts (12), capscrews (10), and mounting bracket (11) from intermediate tunnel (7). b. Installation 1. Install mounting bracket (11) on intermediate tunnel (7) with four capscrews (10) and nuts (12). 2. Install intermediate tunnel (7) on cab floor (9) with thirteen screws (8). 3. Install gearshift lever (6) on transmission stud shaft (3) with washer (1), screw (2), and nut (4). 4. Slide boot (5) down over end of gearshift lever (6). 14-76