TM 9-2320-361-20 14-23. CARGO BODY PERSONNEL HEATER DIVERTER AND DUCT REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS EQUIPMENT CONDITION M35A2, M35A2C, M36A2 Parking brake set (TM 9-2320-361-10). REFERENCES (TM) TM 9-2320-361-10 TM 9-2320-361-20P 1. Remove two clamps (12) and duct (13) from outlet adapter (16) and diverter (10). 2. Remove screw (14), clamp (15), and duct (13) from front cargo rack (1). 3. Remove two clamps (3) and duct (6) from diverter (10) and heater (2). 4. Remove screw (4), clamp (5), and duct (6) from front cargo rack (1). 5. Remove plug (7) and screw (8) from diverter (10). 6. Rotate handle (11) counterclockwise to close damper (9) and expose second screw (8). 7. Remove screw (8) and diverter (10) from front cargo rack (1). 1. Position diverter (10) on front cargo rack (1) and install screw (8) and plug (7). 2. Rotate handle (11) clockwise to open damper (9) and install second screw (8). 3. Install duct (6) on heater (2) and diverter (10) with two clamps (3). 4. Install duct (6) on front cargo rack (1) with clamp (5) and screw (4). 5. Install duct (13) on diverter (10) and outlet adapter (16) with two clamps (12). 6. Install duct (13) on front cargo rack (1) with clamp (15) and screw (14). 14-34