TM 9-2320-361-20 14-18. CARGO BODY PERSONNEL HEATER MOUNTING BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: APPLICABLE MODELS EQUIPMENT CONDITION M35A2, M35A2C, M36A2 Parking brake set (TM 9-2320-361-10). REFERENCES (TM) Heater removed (para. 14-17). Heater fuel pump removed (para. 14-19). TM 9-2320-361-10 Heater fuel filter removed (para. 14-20). TM 9-2320-361-20P a. Removal 1. Remove eight screws (4) and deflector bracket (5) from cargo body floor (7). 2. Remove eight screws (3) and mounting support (2) from mounting plate (10). 3. Remove eight screws (1), mounting plate (10), and gasket (6) from cargo body floor (7). 4. Remove sixteen screws (9) and four plates (8) from cargo body floor (7). 1. Install four plates (8) on cargo body floor (7) with sixteen screws (9). 2. Install gasket (6) and mounting plate (10) on cargo body floor (7) with eight screws (1). 3. Install mounting support (2) on mounting plate (10) with eight screws (3). 4. Install deflector bracket (5) on cargo body floor (7) with eight screws (4). FOLLOW-ON TASKS: Install heater fuel filter (para. 14-20). Install heater fuel pump (para. 14-19). Install heater (para. 14-17). 14-28