TM 9-2320-361-10 2-9. CLEANING INSTRUCTIONS AND PRECAUTIONS (Contd) Table 2-1. General Cleaning Instructions. Cleaning Materials Used to Remove Surface Oil/Grease Salt/Mud/Dust/Debris Body Cab Interior (Metals) Cab Interior/ Cab Top (Material) Frame Engine/ Transmission Glass Radiator Rubber Insulation Tires Wire Rope Wood Grease-cleaning compound, run- ning water, and damp or dry rags. Grease cleaning compound, and damp or dry rags, Saddle soap, warm water, soft brush, and dry rags. Grease-cleaning compound rinsed with running water, and rags. Mixed solution, 1 part grease- cleaning com- pound, 4 parts drycleaning solvent, running water and rags. Glass cleaning solution and clean, dry rags. Not applicable. Damp or dry rags. Soapy water, and bristle brush. Cleaning com- pound and wire brush. Detergent, warm water, and damp or dry rags. High pressure water, soapy warm water, soft brush, and damp or dry rags. Damp and dry rags. Soft brush, soapy warm water, and damp or dry rags. High pressure water, soapy warm water, wire brush, and damp or dry rags. High pressure water, soapy warm water, soft wire brush, and damp or dry rags. Glass cleaning solution and clean, dry rags. Low pressure water, air, soapy warm water, and damp or dry rags. Damp or dry rags. High pressure water, and bristle brush. Wire brush. Low pressure water, soapy warm water, and damp or dry rags. Surface Rust/Corrosior Corrosion-removing compound, bristle brush, dry rags, and lubricating oil. Corrosion-removing compound, bristle brush, dry rags, and lubricating oil. * Not applicable. Corrosion-removing compound, wire brush, dry rags, and lubricating oil. * Bristle brush, warm soapy water, and dry rags. Not applicable. Not applicable. Not applicable. Not applicable. Wire brush and lubricating oil. * Not applicable. * After cleaning, apply light grade of lubricating oil to all unprotected surfaces to prevent continued rust. 2-31 ❆