3-13. AIR CLEANER SERVICE (Contd) (4) Turn two latches (6) to Up posi- tion and lower hood right side panel (7). (5) Unfasten three clamps (9) and pull shell (5) away from head (10) and out of engine compartment. (6) Remove filter element (11) from shell (5). c. Installation. (1) Install filter element (11) in shell (5). (2) Aline shell (5) with head (10), and secure with three clamps (9). (3) Raise hood right side panel (7) and lock in position by moving two latches (6) to down position. TM 9-2320-361-10 WARNING Compressed air used for cleaning purposes will not exceed 30 psi. Use only with effective chip guarding and personal protective equipment (goggles/shields, gloves, etc). (7) Clean filter element (11) by tapping lightly or use compressed air to loosen and remove dirt. (4) Install rain hood (8) on shell (5) and tighten screw (3) and nut (2) on clamp (4). 3-19