TM 9-2320-361-10 2-49. BOW AND TARP KIT (Contd) d. Raising Tarp for Ventilation. (1) Remove rear end curtain (5), if installed. (2) Untie all lashing ropes (3). (3) Fold up tarp (1) into three to five folds until straps (6) attachd to stave and corner assemblies (8) are exposed. (4) Fasten folded tarp (1) in place using straps (6) and buckles (7) attached to outside of tarp (l). (5) Tie front and rear lashing ropes e. Tarp Removal. (3) to end stave and corner assemblies CAUTION (8). Do not fold or stow tarp when wet. Doing this may result in damage to tarp. (1) Remove tarp (1) from vehicle and lay tarp (1) flat on ground, with buckles (9) on top. (2) Fold eyelet side of tarp (1) to first row of buckles (9). (3) Fold tarp (1) over again, and then one more time. 2-203