TM 9-2320-361-10 2-49. BOW AND TARP KIT (Contd) b. End Curtain Installation. (1) Put two lashing ropes (11) through center two eyelets (12) of rear end curtain (18) and pull lashing ropes (11) through until knots at ends of lashing ropes (11) touch eyelets (12). (2) Position rear end curtain (18) on bow assembly (9). (3) Lace one lashing rope (11 around bow assembly (9) and through all eyelets (17) on one side of rear end curtain (18). Repeat for other lashing rope (11). (4) Loop lashing rope (11) around lashing hook (15). Pull lashing rope (11) tight and tie to lashing hook (16). Repeat for other lashing rope (11). NOTE Do not tie or lash bottom of rear end curtain when transporting troops. (5) Join safety strap (13) to two side rail eyelets (14). (6) Perform steps (1) through (4) to install front end curtain (18). 2-201